Pioneer CT-1060W Service Manual page 6

CT-1IOSOW, CT-S77W
3. DISASSEMBLY
Disassembly of Tape Transport Unit 3. Pull off the COPY knob.
4. Pull off the POWER knob.
1. Remove the bonnet.
e Undo the three screws securing the bonnet to the rear panel.
Bonnet
Extend the back
of the knob to
disengage from
the stud.
Fig. 3-3
5. Temporarily pass the counter belt around a chassis hook.
Fig. 3-1
Counter belt
2. Remove the front panel.
@ Undo the three screws in the bottom, and disengage the three
upper and three lower hook catches.
Upper hook catch
{three places) Fig. 3-4
6 Remove the panel stay.
@ Undo the four screws from the left and right hand sides of the
Panel stay. Undo the four screw along the top of the panel
stay. Open the cassette pockets (Push the EJECT buttons).
Disengage the three lower hook catches.
Panel stay
Front panel
Lower hook catch t
(inree places)
Fig. 3-2 Fig. 3-5