Pioneer CT-1060W Service Manual page 7

CT-1IO60OW, CT-S77W
7. Remove the tape transport units. 3. Remove the Main unit.
e@ Undo the two screws securing each transport unit. e@ Undo the five screws securing the Main unit.
Lever B
PLAY button
@ Remove the push knobs A and B.
Fig. 3-6
e PRECAUTIONS FOR REASSEMBLY
(1) When attaching the tape transport unit (deck 1), engage
the groove section of the PLAY button with the
lever B.
(2) When attaching the tape transport unit (deck 2), set
the REC action lever in the lever A.
Main Unit Disassembly
Remove the bonnet. (Refer to Fig. 3-1)
Remove the rear panel.
Undo the four screws, and remove by lifting out (disengage
the two hooks from the Main unit vertical section).
Rest the Main unit.
Rear panel