Related Manuals for LG ST-1630F
Summary of Contents for LG ST-1630F
- Page 1 OWNER’S MANUAL Stand For LG LED Screen Please read this manual carefully before install & operating your set and retain it for future reference. ST-1630F Stand Installation www.lg.com Copyright © 2022 LG Electronics Inc. All Rights Reserved...
- Page 2 Weight (Net/Gross) 150kg/230kg This model (ST-1630F) is a stand for the LAEC018-GN2 AIO model only. The stand has 3 levels to change the height of the screen and comes assembled as LEVEL 1. The height can be changed if needed, and it is described on the page of 4.
-
Page 3: Packing List
Packing List Description Item Photo Qty. Stand Base Right Vertical Support Column Left Vertical Support Column Mounting Frame Horizontal Left Mounting Frame Horizontal Right Mounting Frame Horizontal Reinforcing Rib Mounting Frame Horizontal Support Part Mounting Frame Left Part Mounting Frame Right Part Mounting Frame Middle Left Mounting Frame Middle Right Screw M8X20mm... - Page 4 Screw M4X15mm Screw M6X20mm 8mm Hex Key Anti-Static Gloves Screwdriver...
- Page 5 Adjust the stand height (item 2& item 3) Step1. Loosen the screw as the following position. < Front View > < Rear View > Step2. Fixing the screw as following position is Level 2 and Level 3 < Front View > <...
- Page 6 Step3. Follow the steps below(from page 6) to connect the plate < Level 1 > < Level 2 > < Level 3 >...
- Page 7 Assemble the stand Step1. Install the main body (Vertical Support Column) to the stand base. Note: The front of the vertical support column is where the tapped holes for the screws are visible. se 30pcs M8X20 screws (Item 12) to install the Item 2 and Item 3 on the stand base (Item 1).
- Page 8 Step2. Connect the panel mounting plate. Use 24pcs M4X15 screws (Item 13) to connect Item 6 to the Item 4 and Item 5. < Front View > < Side View > Step3. Make one more in the same way as step 2. Step4.
- Page 9 Step5. Install the panel mounting plate to the main body mounting bracket. Use 40pcs M6X20 (Item14) hexagon socket head cap screws to install Item10, Item11, Item8 and Item9 to the main body mounting bracket.
- Page 10 Screen assembly The 12 PCS fixed screw behind the cabinet are assembled to the cabinet and locked with tools. Hex screw + Mounting lock < Left Cabinet > < Middle Cabinet > < Right Cabinet > < Rear View > Note: Please follow the order of the arrows to install the screen.