Setting And Adjusting The Date/Time - Canon IXUS Z79 Manual

Setting and Adjusting the Date/Time
After changing the battery, or when traveling
internationally, it may be necessary to set or adjust the
camera's date and time using the following procedure.
If "." blinks on the LCD panel when you
change the battery, perform steps 2, 3, 4, and 6.
Press the Date button to
display the Date mode.
• The time is set in Date +
Time mode, step 5.
Date button
SB 5 n
flAtt
o
o
Select button
2
Press the Select button.
• Use the push-button
projection on the strap
clasp.
^When you replace the
battery, the blinking
"-'' display changes to
"'98 1 1",
• The digits to be set start
blinking.
Press the Set button.
• Use the push-button
projection on the strap
clasp.
• Press repeatedly until the
blinking digits show the
desired value.
Set button