Setting The Print Quantity - Canon IXUS Z79 Manual

Setting the Print Quantity
This camera allows you to set the print quantities for a print to
between 0 and 9. This means you can increase the number of
prints without having to wait for the film to be processed, and
also allows to avoid printing pictures that were taken by
accident. Please note that the print quantity setting or changes
to the setting only apply to the next frame to be shot or to the
previous shot.
• The print quantity display is automatically set to 1 print
(P-1) when negative fiim is loaded.
• When slide film is loaded, the print quantity display is
automatically set to no print (P-0).
Setting the Print Quantity for the Next Shot
--—
Selfwit
c:3
TViki
LIZ?
P - :
sun.
"b (f
>—
1
Press the ^ print
quantity button.
• Use the push-button
projection on the strap to
push the button.
^"P-1"{1 print) appears in
the LCD panel.
-■-
©—
CZZJ
CZ>
Dbi«
CZTD
^ p -n
UTE
i^CD
2
Press the ^ button until
the number of prints you
want to set for the next
shot appears in the LCD
panel.
^The print quantity display
changes as follows: P-1,
P-2... P-9, P-O, P-1.
3
Take the picture.
^ After the shot has been
taken, the print quantity
setting is canceled and
the normal single print
setting is resumed.
13-52