Toro 137-0592 Installation Instructions

Spark Arrester Kit
Log Splitter
Model No. 137-0592
This product contains a chemical or chemicals known to the State of California
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
1
Removing the Muffler
Guards
No Parts Required
Procedure
Note:
Retain all hardware unless indicated otherwise.
1. Park the machine on a level surface and shut
off the engine.
2. Allow the machine to cool completely.
3. Remove the 4 bolts (M6) and muffler guard from
the engine (Figure
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
Description
No parts required
Screw (5 mm)
Spark arrester
1).
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
–
2
1
1. Bolt—M6 (4)
Form No. 3414-686 Rev A
Installation Instructions
Use
Remove the muffler guards.
Install the spark arrester.
Figure 1
2. Muffler guard
Original Instructions (EN) All Rights Reserved *3414-686* A
Printed in the USA
g208610