Bosch AMAX panel 2100 Installation Manual page 124

124 en | Address Programming
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Value range: 2 = DX2010 zone, 3 = RF all, 4 = RF RFGB glassbreak, 5 = RF RFUN no magnet,
15 = not used
Notice!
When a zone is assigned to an RF device (3), then the dedicated on-board zone is not
available.
Notice!
AMAX 2100 only: when keypad zones (1-4) are used, onboard zones (5-8) are disabled.
Notice!
Zones may be indicated on keypads with a number that differs from the zone number used for
programming and hardware input: Zones are indicated on LED/LCD keypads according to the
zone numbers. When one zone is disabled the indication number of all following (higher) zone
numbers will shift to a value decreased by one.
Examples:
AMAX 3000 / 3000 BE / 4000:
In a one area or area 1 system keypad the zone number 17 is indicated on a 16 zone LED/LCD
keypad. After disabling zone 16 (or another one in range 1 to 16), zone number 17 is indicated
on the LED/LCD keypad as zone number 16.
AMAX 2100:
In a one area system keypad the zone number 17 is indicated on an 8 zone LED/LCD keypad.
After disabling zone 5, zone number 17 is indicated on the LED/LCD keypad as zone number
5.
2015.05 | 06 | F.01U.309.277
All manuals and user guides at all-guides.com
1466 0
1467 0
1468 0
1469 0
1470 0
1471 0
1472 0
1473 0
1474 0
1475 0
1476 0
1477 0
1478 0
1479 0
Installation Manual
51 1482 0
52 1483 0
53 1484 0
54 1485 0
55 1486 0
56 1487 0
57 1488 0
58 1489 0
59 1490 0
60 1491 0
61 1492 0
62 1493 0
63 1494 0
64 1495 0
Bosch Sicherheitssysteme GmbH
AMAX panel