Status Indicator; B450 With B442 Or B443; General - Bosch AMAX panel 2100 Installation Manual

20 en | Optional Modules and Peripheral Devices
AMAX 2100 / 3000
AMAX 3000 BE / 4000
Figure 4.7: Connecting B426 to the AMAX panel
4.5.4

Status Indicator

B426 provides several LED indicators. The following table describes the system status
indicator (blue).
On
Stable flash
3 quick flashes
Off
Table 4.10: B426 System Status Indicator
4.6

B450 with B442 or B443

4.6.1

General

Use B450 in combination with a plug-in communicator for primary or backup alarm
communication, remote panel programming and other remote applications. The B450 supports
Conettix IP protocol with full authentication, 256 bit AES encryption and resistance to Denial
of Service attacks. B450 also supports compatible Bosch panels using SIA DC-09, CSV-IP. It is
a reliable way to add cellular network communications to existing or new commercial security
and fire installations.
For the AMAX panel, B450 can be used in combination with either B442 or B443 with the
following communication possibilities:
–
–
The communication of B443 is faster than B442.
Installation
1.
2015.05 | 06 | F.01U.309.277
All manuals and user guides at all-guides.com
LED Condition
Trouble Condition
Normal Operation
Communication error
Power failure or other failure conditions
B442: GSM (GPRS)
B443: GSM (GPRS, EDGE), UMTS
Disconnect all power supplies of the AMAX panel before installing B450.
Installation Manual
B426
Denotation
Bosch Sicherheitssysteme GmbH
AMAX panel