Safety Indications For Room Heating Appliances - Silvercrest SSH 1200 A1 Operation And Safety Instructions

2. Safety indications for room heating appliances

Read all the safety indications and instructions.
Failure to adhere to the safety indications and instructions may
cause serious injuries and/or property damages.
Please keep all the safety indications and instructions for
future use.
WARNING! Do not cover!
To avoid the heater overheating, it must not be covered.
The heater may not be placed directly beneath a wall mains socket.
Do not connect this heater to a program switch, time switch, separate
telecontrol system or any other device which automatically switches
on the heater due to the fire hazard if the heater is covered or set
up incorrectly.
Do not use this heater if the heating element is damaged!
The fire protection grille of this heater is intended to prevent
direct access to the heating elements and must be installed in the
designated location when using the heater.
The fire protection grille does not offer adequate protection for
toddlers or infirm persons.
Do not use this heater in the direct vicinity of a bathtub, a shower
or a swimming pool.
Do not commission an appliance which has been dropped.
Do not use the product if you notice any visible damage.
The heater must be placed on a firm, flat and horizontal floor.
If the supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer service or a similarly
qualified person in order to avoid any dangers.
GB/IE/NI/CY/MT 7