Table of Contents
Advertisement
2.2
Intended use
The device must only be operated within the specified technical data.
The binary inputs of the device serve as interface for operating ABB-free@home
conventional push-buttons or for coupling message contacts.
Version BI-F-2.0.x2 and BI-F-4.0.x2 are intended for flush-mounting.
The integrated bus coupler makes possible the connection to the free@home Bus bus.
2.3
Improper use
Each use not listed in Chapter 2.2 "Intended use" on page 5 is deemed improper use and can
lead to personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the
device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
Unauthorized structural changes
■
Repairs
■
The use in bathroom areas
■
Insert with an additional bus coupler
■
2.4
Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts
Product manual 2CKA000073B5466
Safety
®
systems via
│5
Advertisement
Table of Contents
