Terminal Maintenance; Introduction; Malfunction At Power On; Initial Hp Screen Display - HP 262SA Reference Manual

Terminal Maintenance
INTRODUCTION
This section provides terminal maintenance information, including the following:
• What to do if the terminal malfunctions at power-on time.
• Troubleshooting procedures when the terminal malfunctions during operation.
• Adjustments for optimizing the display.
• Preventive maintenance procedures.
MALFUNCTION AT POWER ON
11
When you power the terminal on, the terminal performs a power-on test. The test can last as
long as 55 seconds. After successful completion of the test, the terminal ((beeps" and displays
the initial screen image. Figure 11-1 shows the initial screen display for a terminal in its
primary HP personality. See Appendix F for the initial display when the terminal ((comes up"
in its alternate IBM state.
Cursor
Terminal
Screen
Label Line
Status Line
·.i
Figure 11-1. Initial HP Screen Display
11-1