Advertisement
2
DELL P2724DEB
Disconnect the touch cable away from the connector
S8
of the main board, then tear off 2pcs aluminum foil
and 3pcs acetate tape.
Tear off 3pcs acetate tapes , then disconnect the
speakers' cable away from the connector of the main
board, and then
use a Philips-head screwdriver to
S9
remove 6pcs screws for unlocking the two speakers
with the middle
frame, and remove the speakers.
(No.1~6 Screw size= M3x6, Torque=4~5kgfxcm)
2
3
1
Disconnect the panel lamp cable away from the
interface board and panel module, then tear off the
tape and remove the panel lamp cable. Disconnect
S10
the camera cable away from the connector of the
interface board.
6
5
4
Tear off 1pcs aluminum foil for releasing the USB
cable. Use a Philips-head screwdriver to remove
1pcs screw for unlocking the USB unit, then
S11
disconnect the two USB cables away from the
connectors of interface board. Release the USB
board away from the hook of the middle frame.
(No.1 screw size=M3x3,5, Torque=4 0.5 kgfxcm)
Use a Philips-head screwdriver to remove 2pcs
screws for unlocking the middle frame with panel
S12
module and front bezel.
(No.1~2screw size=M2x3.3,Torque=1
2
Use a Philips-head screwdriver to remove 4pcs
S13
screws for unlocking the camera unit.
(No.1~4 Screw size= M3x8, Torque=6±0.5kgfxcm)
3
1
Use a Philips-head screwdriver to remove 4pcs
screws for unlocking the bracket chassis with the
S14
panel, then disconnect the touch cable.
(No.1~4 Screw size= M3x4, Torque=5±1kgfxcm )
2
4
±
1
0.2kgfxcm)
±
1
4
2
3
1
Advertisement
