Advertisement
Disconnect the LVDS cables away from the connectors
S15
of the panel module, then lift up and
bracket chassis and put it on a protective cushion.
Release the assembled camera unit from the
S16
probers of the middle frame and put it aside for later
disassembling.
Tear off 2pcs aluminum foil to release the Mic boards
Use a Philips-head screwdriver to remove 13pcs
S17
screws for unlocking the middle frame with the panel.
(No.1~12 screw size=M3x4,Torque=3
12
6
4
10
2
11
take away the
0.5kgfxcm)
±
1
5
7
13
8
3
9
Lift up the middle bezel away from the pane module,
S18
then put it on a cushion foam for later disassembling.
Use a Philips-head screwdriver to remove 4pcs
screws for unlocking the left and right Mic boards
S19
with the middle frame, then release the two Mic
boards away from the middle frame.
(No.1~4 screw size=M2x3.3,Torque=1
1
2
Release the touch key cable away from the panel,
S20
then disassemble the front bezel with the panel, then
tear off the mylar tape and release the touch board.
DELL P2724DEB
3
0.2kgfxcm)
±
3
4
Advertisement
