Related Manuals for Siemens N 148/23
Summary of Contents for Siemens N 148/23
- Page 1 N 148/23 IP Interface Secure Application program description Smart Infrastructure A6V11689762_en--_d 2023-07-27...
- Page 2 Documents related the product, such as operating and installation instructions, ap- plication program description, product database, additional software and CE de- clarations can be downloaded from the following website: http://www.siemens.com/gamma-td Frequently asked questions For frequently asked questions about the product and their solutions, see: https://support.industry.siemens.com/cs/products?dtp=Faq&mfn=ps&lc=en-WW...
-
Page 3: Table Of Contents
Contents Information on IP Interface Secure and on the application program Cyber security disclaimer ................. Function ....................Security functions of IP Interface Secure ..........Functions of IP Interface Secure .............. Notes on secure data transfer............... Structure of the setting options in ETS..........Parameter.................... - Page 4 4 | 18 A6V11689762_en--_d...
-
Page 5: Information On Ip Interface Secure And On The Application Program
Siemens’ portfolio undergoes continuous development to make it more secure. Siemens strongly recommends that updates are applied as soon as they are avail- able and that the latest versions are used. Use of versions that are no longer sup- ported, and failure to apply the latest updates may increase your exposure to cyber threats. -
Page 6: Function
Function Security functions of IP Interface Secure 2 Function 2.1 Security functions of IP Interface Secure IP Interface Secure supports the “KNX IP Secure” security standard and offers the following security functions, among others: ● Secured access only from authenticated devices ●... - Page 7 Function Functions of IP Interface Secure DSL router with VPN or ISDN/ dial-in router IP interface Internet (via VPN connection or dial-in modem) KNX device DSL router KNX device or modem KNX device Fig. 1: Secure remote access Additional functions IP Interface Secure has the following attributes: ●...
-
Page 8: Notes On Secure Data Transfer
Notes on secure data transfer 3 Notes on secure data transfer Instructions for secure operation of KNX IP Secure products ● Only operate the device in a protected network environment and do not allow direct access from the Internet. ● Additionally secure remote access to the device via a VPN connection. -
Page 9: Structure Of The Setting Options In Ets
Structure of the setting options in ETS 4 Structure of the setting options in ETS Fig. 2: ETS overview 1 Tree view of the different sections 2 Listing of parameter cards (e.g. devices, topology and group addresses) 3 Parameter section 4 “Properties”... -
Page 10: Parameter
Parameter 5 Parameter Parameters of the “IP settings” parameter card TTL (Time-to-Live) Uni- Parameter Settings cast TTL (Time-to-Live) Unicast 0 ... 255 Function: This parameter can be used to set the TTL value for the IP protocol. The default value is “128.” If the local network administrator specifies a different value, this value can be entered here. -
Page 11: Commissioning
Commissioning Function in factory settings 6 Commissioning 6.1 Function in factory settings In the factory settings, the configuration parameters are set as follows: ● Physical address of IP Interface Secure: Setting: “15.15.255” (=FFFF hex) – Specifying the name and physical address of the device [➙ 12] ●... -
Page 12: Specifying The Name And Physical Address Of The Device
Commissioning Specifying the name and physical address of the device 5. Compare the displayed serial number to the serial number on the device. If the serial numbers do not match, the certificate key of a different device was entered and transfer of data will not work later on. 6. -
Page 13: Setting Up Additional Physical Addresses
Commissioning Setting up additional physical addresses has been configured, via the device itself (AutoIP). The MAC address required for configuring the DHCP service can be read un- derneath this setting option or on a sticker on the device. ● Use fixed IP address When this option is selected, additional input fields are displayed in which the desired IP address for the device as well as a subnetwork screen and the standard gateway can be entered. -
Page 14: Help In Case Of Errors And Problems
Frequently asked questions 7 Help in case of errors and problems 7.1 Frequently asked questions Frequently asked questions For frequently asked questions about the product and their solutions, see: https://support.industry.siemens.com/cs/ww/en/ps/faq 7.2 Possible errors Description Possible cause Solution When the device is... -
Page 15: Checking Device Certificates
Help in case of errors and problems Checking device certificates This section lets you check the physical address, group monitor, and bus monitor among other things. ‘Reports’ section This area lets you export details on different areas of the project or print them dir- ectly. -
Page 16: Resetting The Device To Factory Settings
Resetting the device to factory settings 8 Resetting the device to factory settings NOTICE Loss of data due to resetting device! When you reset the device, all parameters and settings entered are deleted. ● Ensure that the device is really supposed to be reset. Resetting the device to factory settings ◈... -
Page 17: Index
Index Index Application ............5 Remote access ......... 6, 13, Application program description ..... 2 Replacing a device .......... . 8 Assigning an IP address ......... 12 Reports ............15 Check certificate ..........15 Security functions ..........6 Check device certificate ......... - Page 18 Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies © Siemens 2023 Technical specifications and availability subject to change without notice. A6V11689762_en--_d...