Advertisement
OPTIONAL CONNECTIONS
INSTALLATION
I. CONNECTION TO A TV WITH A VIDEO (CVBS) SOCKET
• Just connect the corresponding sockets with the supplied video
(CVBS) cable.
• This cable does not connect the audio, which has to be
connected separately.
NOTE
- Please refer to the instructions that come with the TV set for
selection of the correct input.
2. ANTENNA CONNECTIONS
• Connect the player to the TV antenna input, using the
supplied antenna cable.
• If you already have a VCR (or antenna or cable TV) connected
to the TV antenna input, connect the CD-i player between the
VCR (or antenna or cable TV) antenna output and the TV
antenna input. You may also use an optional external
switchbox, if desired.
- Your CD-i player sends pictures and sound to your TV on the
channel indicated on the selector switch (6) on the rear of the
CD-i player. This signal is sent through the coaxial cable to the
TV.
• To operate the player with your TV, tune your TV to the same
channel that the selector switch is set to on the rear of the
CD-i player..
- Since your CD-i player has a channel selector (6), located at the
rear of the unit, you can avoid local interference by tuning to a
different channel.
NOTE
- The sound sent through the RF output to your TV is mono
only (not stereo).
— Please refer to the instructions that came with the TV-set for
the selection of the proper channel.
11
Advertisement
