Download Print this page

Sealey PW2000HW.V2 Instructions Manual

Hot/cold water pressure washer 135bar 230v

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using.
Inspect power supply leads, plugs and all electrical connections for wear and damage.
Sealey recommend that an RCD (Residual Current Device) is used with all electrical products.
If the product is used in the course of business duties, it must be maintained in a safe condition
and routinely PAT (Portable Appliance Test) tested.
Electrical safety information, it is important that the following information is read and understood.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse - see fuse rating in these instructions.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or
8
is replaced immediately by a qualified electrician.
This product is fitted with a BS1363/A 3 pin plug.
If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
Ensure that repairs are carried out by a qualified electrician.
Replace a damaged plug with a BS1363/A 3 pin plug. If in doubt contact a qualified electrician.
a) Connect the GREEN/YELLOW earth wire to the earth terminal 'E'.
b) Connect the BROWN live wire to the live terminal 'L'.
c) Connect the BLUE neutral wire to the neutral terminal 'N'.
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
Sealey recommend that repairs are carried out by a qualified electrician.
1.2.
GENERAL SAFETY
IMPORTANT Machine shall not be used by children. Children should be supervised to ensure they do not play with the machine.
IMPORTANT The machine has to operate with clean water in order to avoid any damage to the machine.
IMPORTANT ALWAYS FLUSH the machine through thoroughly with cold water after hot water use.
IMPORTANT ALWAYS release any stored water after use.
WARNING! This appliance is for outdoor use only. DO NOT use in a closed place where ventilation may be insufficient. DO NOT use
indoors unless adequate ventilation is assessed by national labour authorities. Ensure that any exhaust emissions are NOT in the
vicinity of air intakes.
WARNING! Must be attended during operation.
WARNING! Shall not be used by children or untrained personnel.
WARNING! To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
Unauthorised parts may be dangerous and/or invalidate the warranty.
WARNING! Always disconnect electrical and water supply on completion of every job.
WARNING! DO NOT use if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses,
trigger gun.
WARNING! If the supply cord is damaged it must be replaced by a qualified person and must be adequately rated.
WARNING! DO NOT use the machine if a supply cord or important parts of the machine are damaged e.g. safety devices, high
pressure hoses, trigger or gun.
WARNING! The machine has been designed to be used with the detergent specified by the manufacturer. The use of other
detergents may put the machine's safety at risk.
WARNING! Wear appropriate protective clothing: eye, ear, gloves and protective clothing. DO NOT use machine within range of
people unless they wear protective clothing.
WARNING! Be aware that if the nozzle is directed towards mechanical parts containing lubricant/grease, as the grease will dissolve
and spread over the surrounding ground.
Vehicle tyres/valves may only be cleaned from a minimum distance of 30cm, otherwise the vehicle tyre/tyre valve could be damaged
by the high pressure jet. The first indication of this is discolouration of the tyre.
© Jack Sealey Limited
HOT/COLD WATER PRESSURE WASHER
135BAR 230V
MODEL NO:
Wear protective
Wear protective
gloves
clothing
Original Language Version
PW2000HW.V2
Warning!
Wear ear
Hot surface
protection
PW2000HW.V2
Warning! Jet must
Not suitable for
not be directed at
connection to
people, animals,
portable water
live electrical
mains
equipment or the
machine itself.
DO NOT inhale
fumes
Recommended fuse rating
13 Amp
Issue 2 (H,1,2,3,F)
15/05/23

Advertisement

loading

Summary of Contents for Sealey PW2000HW.V2

  • Page 1 PW2000HW.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Safety Device

    WARNING! High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and ‰ couplings recommended by Sealey. Protect these components against damage by avoiding their improper use and protecting them against bending, knocks and scratches.
  • Page 3: Installation

    C 7.4. DETERGENT SUCTION Refer to fig. D 7.5. HIGH PRESSURE LANCE 7.5.1. Fan spray adjustment, see fig. E 7.6. HIGH PRESSURE HOSE 7.6.1. Refer to fig. F © Jack Sealey Limited Original Language Version PW2000HW.V2 Issue 2 (H,1,2,3,F) 15/05/23...
  • Page 4: Water Supply

    Replacement of the metal fuel pipe is advisable after disassembly, to avoid fuel leakages. 8.3. Recommended oil change interval 8.3.1. Change the oil after 50 hours of use. © Jack Sealey Limited Original Language Version PW2000HW.V2 Issue 2 (H,1,2,3,F) 15/05/23...
  • Page 5: 10. Troubleshooting

    Suction or delivery valves fouled or worn. Contact an authorised service centre. Bearings worn. Contact an authorised service centre. Water in the oil. O-ring seals worn. Contact an authorised service centre. © Jack Sealey Limited Original Language Version PW2000HW.V2 Issue 2 (H,1,2,3,F) 15/05/23...
  • Page 6: Weee Regulations

    Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...