Adjusting The Wearing Position To Optimize The Visual Experience - Lenovo Legion User Manual

For some users, the included anti-slip adapters in the accessories box may help improve wearing
stability. The letters "L" and "R" marked on the anti-slip adapter represent left and right to make
them easy to distinguish. Install the anti-slip adapters on the temples tightly with the "IN" sides
facing the temples.
Bending the ends of the temples and adding the anti-slip adapters can prevent the
glasses from sliding down and bring the glasses closer to the eyes.
Indication of incorrect wearing (the
glasses slide down, causing the glasses
to be further from the eyes and in a

2.6 Adjusting the Wearing Position to Optimize the Visual Experience

When wearing the glasses, you can replace a different nose pad, or adjust the shape of the nose
pad and the temples to keep the image in the center of your vision and get the complete view of
the image. This can also properly deblur the edges of the image. If the glasses are not worn in a
good position, situations similar to those listed below may occur. You can improve the experience
by adjusting the nose pad and the temples:
When the glasses are worn correctly, it is normal that the edges of the image are
slightly blurrier than the center.
lower position)
Indication of correct wearing (the
glasses are worn in a suitable position,
close to the forehead and brow ridge)
- 6 -