Philips HTB7150 Service Manual page 18

Blu-ray Loader mechanism handling
Note: This Manual describes how to handle TEAC BD-LN150 drives to prevent the unnecessary damages to the drives.
1) Loosen 4 screws "S" & "R" to remove Blu-ray Loader bracket as show in fi gure 19 & 20.
S
Figure 19
2) How to hold BD-LN150.
> Hold by the front and rear: hold the drive as indicated by arrow marks.
> Hold by the sides with your both hands if your hand is small to grab it with one hand at the front and rear: hold the drive as indicated by
arrow marks.
3 - 4
R
Figure 20
> Hold by the top and bottom: this holding method may cause damage of chassis since aluminum chassis is used and not recommended.
Note: Bottom chassis of BD-LN150 is steel.
> Do not touch any parts on the top and do not touch Spindle motor cover on the bottom.
Top
3) How to insert a disc into BD-LN150.
> Do not touch any parts on the top while inserting / ejecting a disc.
> Do not touch any parts on the top even after disc is loaded (while reading a disc).
3 - 4
Bottom