Philips HTB7150 Service Manual page 19

3 - 5 3 - 5
> The other example of bad handling while inserting / ejecting a disc.
4) How to mount BD-LN150.
> Utilize Self tap screw holes on the front and rear.
> Do not use double side tape to fi x it. It may cause frame deformation when it is removed.
5) Application notes and design recommendation in mounting.
> The drive frame is using 0.8t aluminum plate. Pay attention not to occur any distortion when mounting the drive. Any distortion may
cause Load/Eject issue.
> If the drive will be used in the dusty environment, cover the drive to avoid the dust. If the dust is stuck on the roller or OPU lens, it may
cause Load/Eject issue or Read issue.
> In case that drive is mounted with Disc opening up, pay caution not to insert foreign material such as coins.
> Make sure that the drive is used in the specifi ed temperature. (5 degree C to 50 degree C).
> Make sure that the appropriate handling is applied to the drive as shown in Handling Manual. Applying to the parts may cause Load/Eject
issue.