HP 9114B Operator's Manual page 30

Had Unie fornon, Reading Dy
A) Be surethedisc driveis turned on and your battery is
charged
B) Check your cables to make sure they are secure
©) Be suse that you havea disc in the correct disc drive.
D) Besure that the disc has been initialized
FE) Italthis fails, vou may have a bad disc. Try another disc
Drie
Your disc 1s probably worn or damaged. Try using other discs
ta see if youget the same message. 1 you receive the message
ononly anedisc, copy thedisc immediately and discard it
(Please note that if the disc is worn or damaged, the copy may
not work.) Il you receive the same message on several discs
contact vour dealer or HPSales Office
What should [do o f 1 got a msgs at sass, "Disc dieamp
oft, on wdfn
Al Besurethe disc dnve is turnedon and yourbattery is
charged
B) Be sure that you have a disc in your disc drive
C1 If allthis fails, you may have a bad disc. Try anotherdisc
SO What oF the batters doesn't basi fons enosseh tor me 10 do what © icant
oo
A) Always start with a fully charged battery in your HI
91148. Fully charging the battery requires connecting the
recharger for approximately 16 hours (80% charge in 3
hours).
NOTE
You can operatethe HP 9114B with the recharger plugged in. We
recommendplugging in the recharger whenever possible to
extend your battery's life
onthe
B) Place the HP 91148 as the device as thelast devic
interface loop. The Out cable fromtheHIP 91148should
44