Husqvarna PG 400 Petrol Operator's Manual page 8

Operation position
Servicing position
CAUTION:
servicing position on a horizontal surface.
Transport position
To adjust the handlebar
The handlebar lock knobs are operated clockwise,
counterclockwise or put in idle position.
8
Only put the product in the
1. Loosen the lock knobs (A) and adjust the handlebar
(B) to idle position.
A
B
2. When the handlebar position is set, pull the handle
lock knobs up (A) and put them into idle position (B).
A
B
Handle heights
Hole position Handle height, mm/in.
Top 835/33
Center 925/36
Lower 1000/39
To adjust the frame height
The angle of the frame can be changed to divide the
weight of the chassis. This is to decrease or increase
the grinding pressure against the surface.
1. Stop the engine. Refer to
page 13 .
A
A
B
To stop the product on
883 - 004 - 20.12.2023