Sony RSE-500 Operating Instructions Manual page 41

electing the Picture
can select which pictures are displayed from the
jras connected to the VIDEO IN (1 - 8)
lectors or EXT VIDEO IN (9 - 256) connectors,
can select the picture from either the local site or
emote site.
witching the Pictures
To .select a picture at the local site, select LOCAL
2AM SEL from the main menu.
To select a picture at a remote site, select
DEMOTE CAM SEL.
The following .screen appears. (The illustration
jelow is for .selecting LOCAL CAM SEL.)
Stopping the Camera Auto Scan
Temporarily
You can stop the camera auto scan temporarily.
For details on the camera auto scan, see "Switching
Pictures Automatically" on page 2-14 (EN).
1
Select REMOTE PAUSE from the main menu.
The current setting is displayed in the lower-left
comer of the main menu.
2
Press ENTER.
Each time you press ENTER, the setting is
changed between ON and OFF.
—LOCfiL CAMERft SELECT-
NO : [00[ll]
0123456789 B;
<CPNCEL> <0K>
Current setting
MENU
OFF
DIAL
LIST...
KEY...
DISC...
SETTING
OFF
LOCAL
ALARM
CAM SEL
CAM CTR
P I /O
INFO...
HEADSET
MIC
PinP
BUSY
REMDTE
ALARM
CAM SEL
CAM CTR
P I/D
IPAUSEI
LINE
MIC
PICTURE
Select the camera number you want to display on
;he monitor using ♦ or
then press ENTER one
oy one.
The selected camera number is entered in the
number box.
ON:
Disable camera auto scan.
OFF:
Enable camera auto scan.
II
o
rr
CO
■D
CO
Move the cursor to <OK> using then press
ENTER.
The picture of the .selected camera is displayed.
3
cannot select a number greater than the total
era number set in the 8. CAMERA .setting.
Switch the pictures with the Remote
mmander
is the CAMERA key and select the camera number
1
the number keys.