Table of Contents
Advertisement
Figure 17
1. 2 socket connector of the
wire harness
2. Push-in harness clip
2.
Insert the push-in harness clip of the wire
harness into hole in the switch bracket
17).
3.
Route the wire harness along the lower handle
bar tube.
4.
Insert the push-in harness clip of the wire
harness into hole in the spring bracket
18).
Figure 18
1. Cable ties
2. Push-in harness clip
g289209
g289139
3. Bail switch
4. Switch bracket
(Figure
(Figure
g289244
3. Spring bracket
5.
Secure the wire harness to the loser handlebar
tube with 2 cable ties
Routing and Connecting the Wire
Harness and to the Belt Clutch
1.
Route the with harness under the clutch-stop
bracket and toward the front of the machine
(Figure
19).
1. Clutch-stop bracket
2. Belt clutch connector
2.
Insert the 2 socket connector of the wire harness
into the belt clutch connector
3.
Insert the push-in harness clip securing of the
harness in to the hole in the clutch-stop bracket
(Figure
19).
9
(Figure
18).
Figure 19
3. 2 socket connector (wire
harness)
4. Push-in harness clip
(Figure
19).
g289207
g289221
Advertisement
Table of Contents
