Sony SLV-595HF Service Manual page 111

Mode EE
Signal 400 Hz
Measurement Audio level meter
Equipment
Specified Value -7.5+2dBs
Checking Method:
7. Overall level characteristic Check
'The measurement point of the right channel is indicated in [ ].
Signal 400 Hz
Measurement Audio level meter
Equipment
Specified Value —7.5+2dBs
Checking Method:
2) Record signal.
3) Playback the recorded portion.
7-6-2. Normal Audio System Adjustment
(MA-106 board)
© Make adjustment in the SP mode.
* Set the audio monitor in normal (*1).
*1: A condition in which "STEREO", "MAIN L" and "SUB
R" do not appear on the fluorescent display in playback.
(Adjustment Sequence)
3) Recording bias adjustment
4) Overall level characteristic check
1. ACE head adjustment
See "Mechanism Block Adjustment".
2. Playback output level check
Mode Playback
Signal
Alignment tape, 1 kHz (color bar)
portion
Measurement
Equipment
Specified Value
Audio level meter
—1.5+2dBs
Checking Method:
1) Playback 1 kHz portion and make sure that AUDIO LINE
OUT signal level is — 1.5+24Bs.
an —