Mitsubishi Electric 800 Series Instruction Manual page 8

1. Overview
MELSEC GOT
1 Overview
This addition users manual explains the system configuration and specifications for the model
A870GOT Graphic Operation Terminal (hereafter GOT).
This manual only explains those items that differ from the explanation given the model A870GOT
Graphic Operation Terminal User's Manual packaged with the product.
For information on items not covered in this manual please read the users manual packaged with
the product.
The types of EMC specification compatible GOT are listed below.
(front is ivory white) (front is ivory white)
A8GT-70GOT-EB-EU
.
A8GT-70GOT-SB-EU
The above GOT types are equipped with a shield cross to prevent radiated noise from the display.
I I
EMC Specification
The specifications related to the EMC are listed below.
EM1 specifications: EN50081 -2
EMS specifications: EN50082-2
*1 The GOT is an open device (a device in which other units can be installed) and must be
installed in the conductive control panel surface.
The appropriate test items are tested while installed in the control panel.
For information regarding the specifications and precaution items during installation regarding the
EMC refer to the CPU User's Manual (Detailed Edition).
POINT
If a system is configured differently from that described in this manual it will not comply with
EMC specifications, so be sure to follow the instructions given in this manual and configure
the system using the MELSEC-GOT series components.
The instructions in this manual do not guarantee that all of the equipment configured with
MELSEC-GOT series components, including other electrical components, will comply with
EMC specifications.
To check if all the equipment complies with EMC specifications, consult with the manufactur-
ers who produced the equipment.