Table of Contents
Advertisement
must persist in the scene before the tamper event is sent.
3. Click Apply to save your changes.
Analytics
On the Analytics page, you can enable the camera to send ONVIF compliant analytics metadata for cameras
connected to a 3rd party VMS system. This option is disabled by default.
CAUTION — This option should only be enabled when you are connecting the camera to a 3rd party
VMS system that requires sending analytics metadata from the camera to the VMS system.
When the camera is connected to an ACC system, analytics data is transmitted in a different format
and enabling this option may degrade the camera video quality.
DO NOT enable this option if you are connecting your camera to an ACC system.
1. Select the Enable ONVIF Compliant Analytics Metadata check box to enable the camera to send
ONVIF-compliant metadata to a 3rd party VMS system.
2. Click Apply to save your changes.
Privacy Zones
On the Privacy Zones page, you can set privacy zones in the camera's field of view to block out areas that you
do not want to see or record.
The camera supports up to 64 privacy zones.
Setting a Privacy Zone
1. To add a privacy zone, click Add. A privacy zone box is added to the video image.
2. To define the privacy zone area, perform any of the following:
a. Drag any side or corner of the box to resize the privacy zone. Privacy zones can only be
rectangular in shape. Multiple privacy zones can be used to obscure other shapes.
b. Click inside the box and drag to move the privacy zone.
3. Click Apply to save the privacy zone settings.
Deleting a Privacy Zone
Click the X at the top-right corner of the gray box to delete the privacy zone.
Storage
On the Storage page, you can enable the camera's onboard storage feature and download recorded video
directly from the camera. Onboard storage is available only on cameras equipped with an SD card or microSD
card slot.
Analytics
25
Advertisement
Table of Contents
