System; Upgrading The Camera Firmware - Motorola Avigilon H5A-FE Series User Manual

the default username and password. When you enable this feature, the camera will continue to use the
configured username and passwords, so the camera cannot connect to new servers without the appropriate
credentials.
Important: Forgetting your own username or password after enabling this setting voids your
warranty. The primary method of restoring the factory default username and password will be
disabled.
1. At the bottom of the Users page, select the Do not clear usernames or passwords on firmware
revert check box.
2. After you select the check box, the following popup message appears:
Please store your administrator password in a safe place. Password recovery is not
covered by warranty and loss of password voids your warranty.
3. Click OK if you agree to the feature limitations.
Always keep a copy of your password in a safe place to avoid losing access to your camera.

System

On the System page, you can manually upgrade the camera firmware, reboot the camera, and restore all of
the camera's factory default settings.
Click Reboot to restart the camera.
l
Click Restore to revert the camera firmware back to the factory default settings.
l
Tip: If you've enabled the feature that maintains your username and password after a
firmware revert, make sure you have a written copy of your current usernames and
passwords. For more information, see
Revert on the previous
To upgrade the camera firmware, see
l

Upgrading the Camera Firmware

To manually upgrade the camera 's firmware:
1. Download the latest version of the firmware .bin file from the Avigilon website (avigilon.com/support)
and complete the following steps:
2. On the System page, click Choose File to browse and locate the downloaded firmware file.
3. Click Upgrade. Wait until the camera upgrade is complete.
System
Keeping Usernames and Passwords After Firmware
page.
Upgrading the Camera Firmware below.
32