Sounc Mute; Memory & Normalisation; Selection Of Av Mode; Child 1Ock 000 - Sanyo 14MT2 Instruction Manual

@ Sound Mute
@ Memory & Normalisation
@ Selection of AV mode
@ Child Lock
Press the qx button to switch off the sound from the
speakers.
Press the ox button again to switch the sound back on.
tS When the —«#+ or «<i - button is pressed, the sound
muting will be cancelled.
This TV can store and recall the picture and sound control
levels into and from a memory .
—@ Memory
Press the P=P button while the control display is still on the
screen, (apporox 5 seconds), followed by the -—>s*< button.
This completes the memorisation.
Hi Normalisation
Press the ->e<- button to recall the picture and sound control
settings stored in the memory.
Most AV equipment will automatically switch to the AV mode
(because of the pin 8 function signal) by pressing the PLAY
button on your AV equipment.
If not, press the TV/t_] button to select the AV mode
manually.
This TV has a child lock function which can lock the control key
operation on the TV set. By this means, you can block
unexpected key control on the TV set by children, etc.
CHILD LOCK
NO/YES
Setting the Child Lock Mode
Press the F(.) button repeatedly until the word "CHILD
LOCK" appears on the screen, next select "YES" by pressing
the + or -_al button. Now it is in the child lock mode.
FO)
Cancelling the Child Lock Mode
Follow the above procedure and you should select "NO" by
pressing -_/+ Or -_a button.
10