Switching On Your Tv - Sanyo 14MT2 Instruction Manual

Thank you for purchasing your
SANYO TV.
Now | am searching anc storing all
programmes. Please wait.
uto Tuning/Sorting
BBC1 Found and Stored!
Auto-tuning
and sorting
completed!
Switching-on your TV @
[= Press the Mains ON/OFF () switch on the front of the
TV.
The power indicator illuminates red to show the power is on.
& Please make sure that the aerial cable is connected to the
aerial socket of the TV set before switching on.
If no picture appears but the power indicator is on, press the
('), PA, PY, or 0 - 9 button as the TV set is in the standby
mode.
@ A self-automatic tuning and sorting system will be started as
follows;
The tuning status and welcome messages will appear on the
screen.
After completing this procedure, the programme position 1
is selected and the ending messages appear on the screen.
c= To make this message disappear, press any of the control
buttons.
Now the installation is completed !
This TV set provides a self-automatic tuning and sorting
system function called "Plug & Play'. It automatically begins
searching, storing and sorting of ail available channels when
switching on the TV set for first time.
The programme positions 1 to 6 are especially prepared for
the following major stations in the UK.
Programme position 1 : BBC1
Programme position 2 : BBC2
Programme position 3 : ITV
Programme position 4 : CH4
Programme position 5: CHS
Programme position 6 : SKY or BBC(SAT)
Programme position 6 is preserved for SKY or BBC(SAT)
station. If both stations are available in your reception
area, the first found station is stored for the programme
position 6.
# \f any of them are not available in your reception area,
some programme positions from 1 to 6 will not have a
stored station. The remaining stations will be stored from
programme position 7 in sequence as found.
@ This procedure only appears at the first switch on time.
\f additional channels become available (you move to
another city or cable is installed), please follow the
description "Auto-Presetting" on page 15.