Advertisement
ICF-SW1
AN-101
1-3.
HOW
TO SET THE
CLOCK
1 Set MAIN POWER to ON.
2 Press MANUAL TUNE while keeping TIME
SET pressed to adjust the clock to the
current time. To advance the time digits
rapidly, keep MANUAL
TUNE pressed.
Press it to adjust the time indication
precisely.
Current time
[ woo Wises
3 Release TIME SET.
The clock will begin to operate.
Setting the clock vhile listening to the
radio
You cannot set the clock while you are
listening to the radio. Be sure to press
ON/OFF
to turn the radio off and set
the clock.
The display when MAIN
POWER
is
OFF
The current time is displayed.
1-4.
DIRECT
TUNING
1 Set MAIN POWER to ON.
2 Press ON/OFF.
The radio is turned on.
3 Press the desired band (FM or AM) button.
To receive SW, MW, LW, press AM.
4 Input the frequency of the station"by
pressing DIRECT TUNE.
EX. AM. 810 kHz
OOF @,
5 Press the same band button again within 5
seconds.
The station will be tuned in.
SENS selector
6 Adjust the volume.
To turn off the radio, press ON/OFF.
To improve receiving condition
If you input a wrong frequency
The inputted station is not tuned in
Press FM/EXECUTE or AM/EXECUTE
This occurs if you do not press the
again and input the correct frequency.
band button (FM or AM) within 5
seconds after inputting the frequency
NOTICE
of the desired station and the tuned
Reception of 1.8 MHz and 3.6 MHz may
station's frequency will appear.
be difficult because of internal
To tune in the desired station, repeat
spurious signals generated by the
the sme prodedures from the third
built-in oscillators.
step.
Advertisement
