Table of Contents
Advertisement
Available channel set modes
AUTO TV SET: For automatic tuning and storing of all availa
ble UHF/VHF TV channels.
AUTO CATV SET: For automatic tuning and storing of all
available cable channels.
AUTO TV SET/AUTO CATV SET
FOP
On-Screen
!i- Jj '{-
AUTO CHANNEL SET
ITV�f9J'I
Ru l:: a P[]
CH
D
AFC will be turned on automatically and scanning will
start from the lowest channel in the corresponding band
(TV or CATV ).
•During scanning, the message "SCAN N I NG . . . " wi l l be
displayed on the screen.
II
Each time a broadcast is detected, scanning stops and
either "SKIP" ("PO" on the FOP) or "ADD" (no indi
cation o n the FDP) is displayed.
•When there is no broadcast on that channel, "SKIP" is
displayed tor about 1 second on the blue background.
•When there is a broadcast, the on-screen display is super
imposed on the TV picture and "ADD" is displayed
for about one second.
IJ
After completion of scanning, the number of the lowe st
stored channel is indicated superimposed on the
picture. If a l l channels are skipped, the lowest channel
is indicated on the blue background.
AUTO CHANNEL SET
AUTO CHANNEL SET
nv
CTV
MODEl
MODE)
L !
o
� �
��o�::N
PRESS !MENU) TO ENO
PRESS !MENU) TO END
II
To go back to the menu screen, press MENU.
• If you do not need the menu screen, simply engage the
desired operation mode (Play, Record, etc.)
MANU TV SET: For manual tuning and skipping/storing of
U H F/VH F TV channels.
MANUAL CATV SET: For manual tuning and skipping/stor·
ing of cable channels.
MANUAL TV SET/MANUAL CATV SET
On-Screen
FOP
[h 9'-1
SELECT CH NO. AND
PAESS jADO/SKIP)
PRESS (MENUI TO ENO
= =
'"'
TV/VIDEO
(VCRJ
OP£AATION
= =
V
A
CHANNEL
TV
DISPLAY
Ff
< <
> >
4'111 1 8
= = =
YAFllABLESEAFICH
8 ....
For favorite channel prog
II
Select the channel ' ' ' be stored or sk ipped with 1 0-key
input or up/down sc
ning.
•Only stored channels can be cal led up by up/down
scanning. Therefore, to re-store skipped channels, use
1 0-key input.
IJ
To store, press R EPEAT/ADD (on the recorder) or
ENTE R/ADD (on the remote control ).
To skip, press COUNTER R ESET/CANCEL/SKIP (on
the recorder) or CANCEL/SKIP/C.RESET (on the remote
control ).
•"ADD" or "SKIP" will be displayed. (On the FOP,
when a channel is skipped, "PO" will be d isplayed for
about
second in place of the channel number and then
1
the channel number will start blinking.)
II
Repeat steps 1 and 2 for other channels.
II
To go back to the menu screen, press MENU.
• If you do not need the menu screen, simply engage the
desired operation mode (Play, Record, etc.)
- 21 -
ON-SCREEN DISPLAY
ON-SCREEN MODE CHECK DISPLAY
"Cassette Loaded" Mark
Clock time
Tape Speed
Tuned-in Channel
Operation Mode
H2
INDEX 5
INDEX/MARK/
ITR indication
ERASE indication
(See page 3 1 )
(See page 26)
Hi-Fi and/or
18)
GO-TO indication
SLOW-motion
speed/STILL/
NORM indication
(See page 29)
(See page
COUNT indication
PLAY X2
(See page 24)
(See page 30)
LOADING AND UNLOADING A CASSETTE
Loading
[QQ]
I nsert a cassette as illustrated with its labelled side facing you.
• With a cassette inserted, the
mark to indicate "cassette
inserted" appears on the d isplay panel and TV screen.
Unloading
Press the EJECT button. The cassette will be ejected.
Motorized loading system
• The cassette can be loaded even when the power has not
been turned on. I nserting a cassette into the loading slot
turns the power on automatically.
Automatic indication
•Channel display
Each time a d ifferent channel is selected, the tuned-in chan
nel will be displayed on the screen tor 5 seconds. (No chan
nel display is available during tape playback.)
•Operation mode
Each time the operation mode is changed, the engaged mode
is d isplayed.
RECORD (5 sec, together with channel, cassette mark and
tape speed ). PLAY (5 sec, only when engaged from Stop
mode), FF/REW (5 sec, only when engaged from Stop mode).
I NSERT and A.DUB (5 sec). A.DUB PAUSE (5
CORD PAUSE, and INSERT PAUSE (as long as the Pause
mode is engaged).
•"Cassette Loaded" mark
The mark is d isplayed for 5 seconds when a cassette is insert
ed, and blinks until the cassette is ejected when the EJECT
button is pressed.
Manual recall/cancel
• For anytime checking of the mode, press the ENTER button
on the remote control. The corresponding ind ications above
will be available on the screen together with the clock time
for 5 seconds.
• The cassette can be unloaded even when the power has
been turned off. If a cassette is inside, pressing the EJECT
button turns the power on automatically and, after ejection
of the cassette, shuts it off automatically.
• Inserting a cassette, with its safety tab removed, turns the
recorder on and playback of the cassette begins automati·
cally.
Notes:
• Be sure to insert the cassette firmly into the slot; otherwise,
it will be automatically rejected.
• The automatic loading mechanism will operate only when
the cassette is inserted correctly.
Caution
• If unloading of a cassette is not possible, check to see
whether the T I M E R indicator is lit. If so, press the
T I M E R button so the T I M E R indicator extinguishes.
• Do not attempt to pull out the cassette once auto
matic loading has started.
r: - - - - - - - WARNING - - - - - - ::i
.:
�
�
• Do not insert fingers or any foreign object beyond the
I
door flap of the cassette loading slot, as this cou ld
lead to injury or damage to the mechanism. Show
I
..!:'.
:.
�
:
:,
_ _ _ _ _ _ _
L
i
c
i
t
h
r
.
- 22 -
sec),
RE
I
_J
I
Advertisement
Table of Contents
