Table of Contents
Advertisement
AUTOMATIC TIMER RECORDING
First of all, load a cassette (with safety tab in place);
power will be switched on automatically.
= = = =
- VOLUME
V CHANNEL A
+
= =
[VCfl)
v ....-. . A
TVMDEO
= =
=
FF
....
< <
> >
8
B ...
REW
VARIABLE S£ARCH
D
Press MENU.
• If "SET" in " 1 . PROGRAM SET" is not d isplayed ..
program setting is not possible (during timer record ing,
instant timer recording, or when the clock has not been
set).
II
Press numeric key "1 ".
•The following PROGRAM CHECK menu will appear on
the screen (and the program appearing at the top of the
screen will also be shown on the recorder's FDP).
Channel
Day
Recording
spee d
Stop time
"Cassette loaded" ind icator
FOP
Channel
Week (only "2nd" is displayed.)
Program number
Recording speed
Day
Stop time
Start time
The built-in 1 4-day/8-event programmable timer permits
recording of preset channels on preset days at preset
times for preset lengths while you are away.
•Pressing the MENU button at this stage will restore the
1
menu screen.
• I n the initial stat
Otherwise the cu
program number. , The last-set program will always be
60
displayed at the top of the screen.
• If left for more t�an
seconds, this menu will be can-
celled.
II
Select the program to be set by pressing the corresponding
numer.ic key ( " 1 " to "8").
•Although only three programs at a time are displayed on
the screen in the Program Check mode, you can call up
any program whether it is displayed or not.
•The corresponding PROGRAM SET menu will appear,
with the cursor on "DAY".
FOP
P
O
'!- A M
1
�
?
SUN-
DAY
START I� J� �� M U2L
- 1ST
12:01r 2
1;1JOPt.I
sP
STOP
1.-aa ....
PAESS (SHECT/SET!
PRESS !MENUI TO END
• You can also select the program to be set by pressing
SET · - or
to move the cursor to the desired program,
+
then pressing SELECT to call up the PROGRAM SET
menu.
II
Select the item to be set (DAY, START, CH, STOP,
SP/EP) by pressing the SELECT button.
•As the SELECT button is pressed, the cursor moves in
Set
sequence from DAY to SP/EP and then returns to DAY.
II
the desired data by pressing the SET - or
+
•Channel setting-.is also possible with 1 0-key input.
•Pressing the SET
or - button for more than 1 second
�
continuously 3dvances the indication automatically.
j
Pressing the bUttons once advances the indication in
single increments o
y.
•The STOP time
n be set within 24 hours of the
START time.
e
•To record an F
simulcast, press the SIMU LCAST
button
on the recorder at any time while program
ming. "SIMUL" will appear on the screen in the mode
column above channel number, and "SI M U L" will
appear on the FDP.
•To record an external source, press the numeric key
while the cursor is at the channel position. "AUX" will
appear in the channel display section on the screen and
"AU" on the FDP.
Iii
When all data has been set, press MENU.
•The PROGRAM CHECK menu will be called up and the
program you have just set will appear at the top of the
screen.
(
)
• I n the PROGRAM CHECK menu, simu lcast recordings
•
are indicated by an asterisk
appearing between the
start time and channel indicator.
II
Press T I M E R .
•The TIMER indicator and the numbers of the preset
programs will light on the FDP. (For error indications,
see next page.)
•To cancel th e PROGRAM CHECK menu without enter
ing the Timer Standby mode, press the DISPLAY button.
- 27 -
IMPORTANT INFORMATION ON TIMER RECORDING
of
Variety
day setting poss i bilities
Setti ng
No.
One day of the 1st 'N98k
2
One day of the 2nd 'Mlek
3
Dally serial recording from Sunday
through Saturday week after wee k
4
wee k after
Dally serial recording from
through Saturday
5
Dally serial recording from Monday
through Friday vvee k after 'Mlek
As
+
•
the SET
button is pressed, the indication progresses
in sequence from No. 1 to No. 5 of the above settings and
then returns to No. 1 .
Note:
• The 1 st week or 2nd week do not refer to weeks on the calendar; the 1 st week refers to the seven-day period from the present
day and the 2nd week, to the following seven-day period. These two weeks are counted from the time of setting.
MON TUE
THU
Setting time
8:00 PM
+
button.
Error indication
• When the T I M E R button is pressed with a cassette loaded
and the timer correctly programmed, the T I M E R indicator
on the display will light with the corresponding preset
program number(s) also lighting and the power is turned
off.
• When you have preset several programs at a time, confirm
that all the preset program numbers light together with the
T I M E R indicator when the T i M E R button is pressed. The
program whose number does not light has not been correct
ly preset. Recheck the programmed data.
"O"
• ff all programs have been wrongly preset, the T I M E R indi
cator will blink for about 10 seconds when the T I M E R
button is pressed, and then the Timer Standby mode will
be cancelled.
• If the TIMER button is pressed when a cassette is not
loaded, the T I M E R indicator will continue blinking. Also, a
programmed timer recording will not be executed after the
start time has passed, even if you insert a cassette.
• If a cassette with its safety tab removed has been loaded,
it will be ejected automatically when the T I M E R button is
pressed. The T I M E R and
blinking.
• As long as the T I M E R button is engaged with the T I M E R
indicator lit, unloading of a cassette i s not possible.
FOP
Day (+REPEAT(
2nd + Day (+ REPEAT)
� --'1!'!1 - - : - - - - -
.
- :
A ll days + REPEAT
-
- :
M
onday
.n -
MON
through SAT + REPEAT
_ _ ,. _ _ ...
wee k
,
. :: '1!'!1 : _ -
MON
P
T
through FRI + RE
EA
• REPEAT indication for No. 1 and No. 2 is available by
pressing the R EPEAT button at any time in the setting
procedure.
FRI
SAT SUN MON TUE
SAT SUN MON TUE
THU
FRI
1st week
2nd week
s,oOPM
Timer operation
• Tape loading starts 20 seconds before the preset start time
and the recording start signal is triggered 2 seconds before
the preset time so that recording starts exactly at the
preset time.
• During timer recording, the number of the program that is
presently operating will be blinking.
• After timer recording, the power is .Witched off and the
auto-rewind mechanism does not function. If the end of
the tape is reached during timer recording, the cassette is
automatically ejected and then the power is switched off
with the T I M E R indicator blinking.
• If a power failure should occur. not only time-keeping stops
(see page 1 9), but also all the preset data will be cancelled.
(A blinking SU 1 2: 00 AM indicates this after power has
been reapplied.) In such cases, first correct the time indi
cation and then re-enter the programming data.
Checking the programmed
• Checking can be performed anytime, even after the T I M E R
button h a s already bee n engaged. T o do this, press th e re
IQQ]
corder's MENU button while in the Timer Standby mode.
indicators will continue
The program number will blink on the FDP and you can
check each program by advancing program numbers with
the SET button. If re-programming is required, disengage
the Timer Standby mode and use the regular on-screen pro
gramming method.
- 28 -
Indication
- -
ON-SCREEN
3
-
1ST
MON - - : - - AM --
- - : - - AM SP
- -
-
3
-
2ND MON - - : - - AM - -
- - : - - AM SP
3
SP
- -
SUN·SAT
--:-- AM - -
'"'
REPEAT
- - : - - AM
-
3
-
--
- - -
MON.SAT - - : - - A M
REPEAT
- - : - - AM SP
-
- -
3
:
_ - _ - _
MON·FRI
- - : - - AM - -
REPEAT
- -: - - AM SP
THU
SAT
FRI
8,00 PM
data
Advertisement
Table of Contents
