Firmware Upgrade - Sharp CP-AWS0101 Quick Start Manual

Aquos wireless surround: subwoofer

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Connecting to your AQUOS Wireless

Surround enabled SHARP TV

Before you can add the wireless subwoofer to your TV, your TV will need

to be connected to online services via Wi-Fi or LAN/ethernet cable. To do

this, follow the network instructions for your model of TV.

1. To begin the pairing process, press

open the settings menu. Navigate to <Sound> and then <Wireless

Speaker>.

2. In the Wireless Speaker menu, turn <Wireless Speaker> to "On". The

TV will perform a network check.

NOTE: You will need to be connected to a 5GHz Wi-Fi network for the best

wireless speaker performance. If a 5G Wi-Fi network is not available, a

2.4GHz network can be used. A 2.4GHz network is more prone to interference

and may impact wireless speaker performance.

3. In the television's Wireless Speaker menu, select <Add new

subwoofer>. The TV will prompt you to confirm the subwoofer is

connected to a power supply and located in its final position. Select

<OK> to begin the pairing process.

4. Short press the

button on the back of the subwoofer. The

PAIR

subwoofer will begin pairing with the TV. To confirm pairing mode,

the LED on the rear of the subwoofer will flash green.

5. On-screen prompts will appear one after the other on the TV which

will require your input:

a. Invitation to connect.

Select <Accept> to proceed with the pairing. The TV will confirm

pairing in the bottom right corner of the display.

NOTE: Once the subwoofer is paired to the TV, a firmware upgrade

may be detected. If this occurs, please allow the subwoofer to

upgrade.

b. Optimise wireless connection

Select <Continue> to begin the connection optimisation process.

c. Adjust listening position

You will be invited to enter distance values between your listening

position and elements of the sound system.

This balances each speakers output to create the optimal sound

stage.

After selecting the distance values, select <Continue>.

NOTE: This balance only affects the speakers whilst using the AWS

system.

7. Select <Finish> to complete the pairing process.

NOTE:

ū During the pairing process, the speakers may perform an over-the-air

update. Please allow this process to finish.

ū Some of the functions and features described in this document may

change. For the latest information, please refer to the online TV manual.

You can find the online TV manual by selecting the SHARP from the TV's

home screen.

Setting speaker properties

Whilst in the Wireless Speaker menu, select <Subwoofer property>.

Choose from:

Name

Allows you to change the name of the speaker.

Set Location

Edit the location of the speaker in relation to your television and your

preferred listening position.

on the TV remote control to

Remove

Disconnect the paired speaker from the TV.

Restart

Restarts the speaker.

Version

Displays the current firmware version of the speaker.

Using Dolby Atmos

To listen to Dolby Atmos audio through your AQUOS Wireless Surround

system, you will need Dolby Atmos content delivered to your AWS

SHARP TV and DAP (Dolby Audio Processing) set to ON in the TV sound

menu.

Dolby Atmos content is available via some broadcast services, streaming

services or via external devices connected by HDMI e.g. a Dolby Atmos

compatible games console or Blu-ray player.

For more information on Dolby Atmos content availability visit dolby.

com.

AQUOS Wireless Surround will also offer an enhanced audio experience

for other audio source types such as Dolby Digital, DTS and PCM. With

DAP enabled, Dolby Audio Processing will render even 2.0 channel audio

and utilise the available speakers connected.

NOTE: A Dolby Atmos signal cannot be transmitted via an optical or

analogue connection e.g. AUX, from an external device.