NEC N8154-21 User Manual page 32

6.
Connect the SAS/SATA cable, power cables, and SGPIO cable coming with the cage following the
figure shown below.
Connect proper cables to the connectors on the back board of the HDD cage.
Connect the power cables (P9 and P10) of the server to the mating power connectors on the
back board of the HDD cage. Connect the right angle plug of the SAS/SATA cable to the
SAS/SATA connector, and SGPIO cable to the SGPIO connector on the back board of the HDD
cage.
Power cable
SAS/SATA cable
SGPIO cable
5