Installing The Hp 10312D In The Hp 10269C - HP 10312D Operating Manual

Installing the
HP 103120 in
the HP 10269C
Analyzing the Intel 80286
1-4
The HP 10269C routes the signals from the HP 103120 Preprocessor
and provides the correct mechanical connections for the logic analyzer
probes. To install the HP 103120 to the HP 10269C:
1. Install the HP 103120 Interface Module Card on the underside of
the HP 10269C General Purpose Probe Interface Pod (see figure
1-1).
2. Insert the metal tabs of the interface card in the slots of the pod.
3. Connect the two pod internal cables to the interface card.
4. Gently fold the interface caid into the pod and fasten the cable end
of the interface card to the pod with the two captive screws on the
interface card.
To prevent equipment damage, be sure to remove power from
both the logi.c analyzer and the target system whenever the
interface module or microprocessor is being connected or
disconnected.