Assembly Instructions / VTR..0 ... VTR..1
4 Installing the turbocharger / 4.1 Completion work, if required
4
Installing the turbocharger
NOTICE
Strength classes of foot fixing screws
For installation of the turbocharger, foot fixing screws in accordance with
strength class 10.9 or 12.9 have to be used.
Attach lifting gear to the turbocharger.
u
Align turbocharger on bracket and place it.
u
Tighten foot fixing screws with the admissible tightening torque.
u
Remove the lifting gear.
u
4.1
Completion work, if required
Attach all gas, air, water and oil pipes in accordance with the enginebuilder's instructions.
u
Fit speed sensor and plug in cable connector.
u
© Copyright 2020 ABB. All rights reserved.
HZTL455311P0026_EN
Rev.B
July 2020