Remoteupdate - Miele DGC 7840 HC Pro Operating And Installation Instructions

Settings

RemoteUpdate

The
RemoteUpdate
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home" or "Settings –
Miele@home").
The RemoteUpdate function is used for
updating the software in your steam
combination oven. If an update is
available for your steam combination
oven, it will be downloaded
automatically by your steam
combination oven. Updates will not be
installed automatically. They must be
initiated manually.
If you do not install an update, you can
continue to use your steam combination
oven as usual. However, Miele
recommends installing updates.
Switching on/Switching off
RemoteUpdate is switched on as
standard. Available updates will be
downloaded automatically and will only
be installed if you initiate it.
Switch off RemoteUpdate if you do not
wish any updates to be downloaded.
54
menu option is only
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
A message will appear in your steam
combination oven display if a software
update is available.
You can install the update immediately
or postpone this until later. When the
steam combination oven is switched on
again, you will be reminded about the
update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch the steam combination
oven off during the update.
Otherwise, the update will be aborted
and will not be installed.
- Some software updates can only be
carried out by a Miele service
technician.