Advertisement
SilverCrest MN10 Notebook Mini-Mouse
3. Inserting
the
batteries
Step 2 – Connect USB receiver
1. Plug the supplied USB radio receiver into a free USB port of your PC or notebook.
The driver is automatically installed by the Microsoft Windows
system.
2. During this short, one-off, procedure a message appears first "New hardware found
(Human Interface Device)"; followed by the message "The new hardware has been
installed and can now be used."
3. Please press the button on the USB receiver first to start one-off and automatic
radio tuning between the USB receiver and mini-mouse.
4. Then press the connection button on the underside of the mini-mouse within 20
seconds (see Figure below).
4. Push on the battery
cover
Connection button on
USB receiver
Connection button on
underside of the mouse
Insert the batteries supplied, type AAA, with
the polarities correctly positioned (note and
match + and – symbols) in the mini-mouse
and push the battery cover back onto the
mouse.
The polarity positions of the batteries to be
inserted are indicated by corresponding
markings in the battery compartment.
English
®
2000/XP operating
5
Advertisement
