Troubleshooting - Whirlpool OMK58CU1SB Owner's Manual

CLEANING THE CATALYTIC PANELS
This oven is equipped with special catalytic liners that
facilitate cleaning of the cooking compartment thanks
to their special self-cleaning coating, which is highly
porous and able to absorb grease and grime.
These panels are fitted to the shelf guides: When
repositioning and then refitting the shelf guides,
make sure that the hooks at the top are slotted into
the appropriate holes in the panels.

TROUBLESHOOTING

Problem
The oven is not working.
The display shows the
letter "F" followed by a
number or letter.
The display is showing the
message "Hot" and the
selected function will not
start.
The display shows unclear
text and appears to be
broken.
* Available only on certain models
Policies, standard documentation and additional product information can be found by:
• Using the QR code in your appliance
• Visiting our website docs . whirlpool . eu
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
•
sales Service, please state the codes provided on your product's identification plate.
8
Possible cause
Power cut.
Disconnection from the
mains.
Oven failure.
Temperature too high.
Another language set.
To make best use of the catalytic panels' self-cleaning
properties, we recommend heating the oven to 200 °C
for around one hour using the "Forced Air" function.
The oven must be empty during this time.
Then leave the oven to cool down before removing
any remaining food residues using a non-abrasive
sponge.
Please note: Using corrosive or abrasive cleaning agents,
stiff brushes, pan scourers or oven sprays could damage the
catalytic surface and compromise its self-cleaning properties.
Please contact our After-sales Service if you require
replacement panels.
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest Client After-sales Service Centre
and state the number following the letter "F".
Allow the oven to cool down before activating the
function. Select a different function.
Contact your nearest Client After-sales Service Center.
400011708343