Assembly Aspire Pe5-P4A - Husqvarna Aspire P5-P4A Operator's Manual

evaluate all functions and carry them out
without restrictions, or if you have received
corresponding instructions.
• This charger is not intended for use by children or
persons with physical, sensory or mental limitations
or a lack of experience or knowledge. This charger
can be used by children aged 8 or older and
by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge
if a person responsible for their safety supervises
them or has instructed them in the safe operation
of the charger and they understand the associated
dangers. Otherwise, there is a risk of operating
errors and injuries.
• Supervise children during use, cleaning and
maintenance. This will ensure that children do not
play with the charger.
• Only charge 18V POWER FOR ALL system
batteries with a capacity of 1.5 Ah and above. The
battery voltage must match the battery charging
voltage of the charger. Do not charge any non-
rechargeable batteries. Otherwise there is a risk of
fire and explosion.
• Only use the charger in enclosed spaces and do not
expose it to wet conditions. Water entering a power
tool will increase the risk of electric shock.
• Keep the charger clean. Dirt poses a risk of electric
shock.
• Always check the charger, cable and plug before
use. Stop using the charger if you discover any
damage. Do not open the charger yourself, and
have it repaired only by Husqvarna or by an
authorised after-sales service centre using only
original replacement parts. Damaged chargers,
cables and plugs increase the risk of electric shock.
• Do not operate the charger on an easily ignited
surface (e. g. paper, textiles, etc.) or in a flammable
environment. There is a risk of fire due to the
charger heating up during operation.
• Do not cover the ventilation slots of the charger.
Otherwise, the charger may overheat and no longer
function properly.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• In case of damage and improper use of the battery,
vapours may also be emitted. Ensure the area is well
Introduction
WARNING:
safety chapter before you assemble the
product.
1867 - 007 - 10.01.2024

Assembly Aspire PE5-P4A

Read and understand the
ventilated and seek medical attention should you
experience any adverse effects. The vapours may
irritate the respiratory system.
• Under abusive conditions, liquid may be ejected
from the battery. Contact with this liquid should be
avoided. If contact accidentally occurs, rinse off with
water. If the liquid comes into contact with your eyes,
seek additional medical attention. Liquid ejected
from the battery may cause irritation or burns.
• Products sold in GB only: Your product is fitted with
an BS 1363/A approved electric plug with internal
fuse (ASTA approved to BS 1362). If the plug is
not suitable for your socket outlets, it should be cut
off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement
plug should have the same fuse rating as the original
plug. The severed plug must be disposed of to
avoid a possible shock hazard and should never be
inserted into a mains socket elsewhere.
Safety instructions for maintenance
WARNING:
instructions that follow before you do
maintenance on the product.
• Remove the battery before you do maintenance,
other checks or assemble the product.
• The operator must only do the maintenance and
servicing shown in this operator's manual. Turn to
your servicing dealer for maintenance and servicing
of a larger extension.
• Do not clean the battery or the battery charger with
water. Strong detergent can cause damage to the
plastic.
• If you do not do maintenance, it decreases the
life cycle of the product and increases the risk of
accidents.
• Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
• Only use original spare parts.
To attach the pruner to the telescopic
shaft
1. Attach the pruner (A) to the telescopic shaft (B). The
pruner must move into the holder on the telescopic
shaft easily, if not, it is not installed correctly. (Fig.
48)
Read the warning
19