Mounting the cover in a side-by-side
combination
Insert the pin (from the side-by-side
installation kit) halfway into the guide
in the cover for the left-hand
appliance.
Place the second cover onto the pin
and press the two covers together.
Click the two covers together into the
gap above the appliances.
Install the two plastic covers on
both sides of the appliance door by
clicking them into the gap between
the appliance door and the cabinet
door, starting at the bottom and
working up to the top.
Secure both sides of the wine
conditioning unit using at least 3
clips for the gap covers.
Now attach the gap covers onto
the retaining clips on both sides.
With side-by-side combinations, the
covers are only required on the outer
side.
Installation
45