Miele KWT 2662 ViS Operating And Installation Instructions page 67

Switching on Push2open
 In Settings mode , use the 
and  sensors to select
and touch OK to confirm your
selection.
 Use the  and  sensors to select
and confirm your selection with
Mode
OK.
 Use the  and  sensors to select
Push2open and confirm your selection
with OK.
 Touch the  sensor to return to the
previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Push2open function. The lower the
intensity, the less force is required when
you push against the appliance door.
 In Settings mode , use the 
and  sensors to select
and touch OK to confirm your
selection.
 Use the  and  sensors to
select Intensity
confirm your selection.
 Use the  and  sensors to select
the desired intensity (
) and select OK to confirm your
High
selection.
Door assistant
Door assistant
and touch OK to
Low , Medium
Selecting further settings
- Adjusting the duration of the
AutoClose function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode , use the 
and  sensors to select
and touch OK to confirm your
selection.
 Use the  and  sensors to
select AutoClose
confirm your selection.
 Use the  and  sensors to select
the duration (5 to 30 seconds) and
confirm your selection with OK.
To protect against unintentional
opening: If you do not pull the
appliance door open, it will close
again by itself after the duration
defined by you.
Switching on Pull2open
 In Settings mode , use the 
and  sensors to select
and touch OK to confirm your
selection.
 Use the  and  sensors to select
, and confirm your selection with
Mode
OK.
 Use the  and  sensors to select
Pull2open
with OK.
 Touch the  sensor to return to the
previous menu level.
Door assistant
and touch OK to
Door assistant
and confirm your selection
67