Table of Contents
Advertisement
•
{Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR & VOL} - Disable the keyboard
function.
NOTE:
To enable or disable the keyboard control lock, press
[ ] and [ ] buttons simultaneously and keep pressing
continuously for more than 3 seconds.
Tiling
With this function you can create a single large-screen matrix
(video wall) that consists of up to 225 sets of this display (up to
15-sets on the vertical and 15-sets on the horizontal sides). This
function requires a daisy-chain connection.
Tiling
H monitors
V monitors
Position
Frame Comp.Top
Frame Comp. Bottom
Frame Comp. Left
Frame Comp. Right
Frame Comp.
Enable
Switch on delay
Brightness
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1
2
6
7
11
12
16
17
21
22
•
{H monitors} - Select the number of displays on the
horizontal side.
•
{V monitors} - Select the number of displays on the vertical
side.
1
1
1
0
0
0
0
Off
Off
Auto
Normal
2
4
3
4
5
8
9
10
13
14
15
18
19
20
23
24
25
•
{Position} - Select the position of this display in the screen
matrix.
•
{Frame comp. Top} - set the pixel numbers of top frame
compensation.
•
{Frame comp. Bottom} - set the pixel numbers of bottom
frame compensation.
•
{Frame comp. Left} - set the pixel numbers of left frame
compensation.
•
{Frame comp. Right} - set the pixel numbers of right frame.
•
{ Frame comp.} - Choose to turn the frame compensation
function on or off. If selected {Yes}, the display will adjust
the image to compensate for the width of the display bezels
in order to accurately display the image.
•
{Enable} - Choose to enable or disable the Tiling function. If
enabled, the display will apply the settings in {H monitors},
{V monitors}, {Position}, and {Frame comp.}.
•
{Switch on delay} - Set the power-on delaying time (in
seconds). The default option {Auto} allows a sequential
powering-on for each display by their ID number when
multiple displays are connected. The options are: {Off/
Auto/2-255}.
•
Brightness: {Normal}/{ACS}
{Normal}: Apply OSD brightness value (backlight).
{ACS}: Apply brightness value (backlight) which is adjusted by
MIC tool. The default value before adjustment is the same as
OSD brightness value, e.g., 70).
Some brightness (backlight) settings cannot be adjusted by
OSD. Please refer to Picture Menu Backlight setting priority.
Off Timer
Set the display to turn itself off to standby mode within a
specified period of time.
The options are: {Off, 1 ~ 24} hours from current time.
Position
NOTE:
When the "Off timer" is activated, the "Schedule"
settings will be disabled.
Date and time
Adjust the current date and time for the display's internal clock.
Date and time
Position
1. Press [OK] button to enter or make a selection.
2. Press [
] back button to return.
3. Press [ ] or [ ] button to adjust the settings.
* Cannot set the time to any date after the year 2037.
65
65BDL4650D/75BDL4650D/86BDL4650D
Auto Sync
Year
2023
Month
Day
Hour
Minute
Current date time
2023.02.02
Press [OK] To Set Clock
On
02
02
11
56
11:56:01
Advertisement
Table of Contents
Troubleshooting
