Package Contents; Installation Notes - Philips 4000 Series User Manual

2.2.

Package Contents

Please verify that you received the following items with your package content:
• LCD display
• Quick start guide
• Remote Control and AAA
Batteries
• Power cord
• RS232 cable
• RS232 daisy chain cable
• IR sensor cable
• USB cover
• AC Switch cover
• Cable Clip x 2PCS
• Philips logo plate
• CRD22 Wi-Fi module
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and
complies with the safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
• Keep the packaging materials appropriately after unpacking the product.
2.3.

Installation Notes

• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
• The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product
and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to
do so may shorten the life of the internal parts.
• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
LCD display
* The supplied power cord varies
depending on destination.
Power Cord
AC Switch
Cover
CRD22 Wi-Fi module
* Differences according to regions.
* Display design and accessories may differ from those illustrated above.
Remote Control
and AAA Batteries
RS232 Cable RS232 Daisy
Chain Cable
USB Cover Cable Clip
x 2PCS
13
98BDL4650D
Signage Display
4000 Series
98BDL4650D
Quick start guide
IR Sensor Cable
Philips logo
plate
2 should be used).