Philips 4000 Series User Manual page 62

98BDL4650D
Noise reduction
Reduce picture noise. You can select a suitable noise
reduction level.
The options are: {Off} / {Low} / {Medium} / {High}.
NOTE: This item applies to VGA input only.
Gamma
Gamma is what controls the overall brightness of an image.
Images which are not corrected properly can appear too
white or too dark, so controlling the gamma properly can
have a huge influence on the overall picture quality of your
display.
The options are: {Native} / {2.2} / {2.4} / {S gamma} /
{D-image}.
Color temperature
Select a color temperature for the image. A lower color
temperature will have a reddish tint, while a higher color
temperature gives off a more bluish tint.
The options are: {3000K} / {4000K} / {5000K} / {6500K} /
{7500K} / {9300K} / {10000K} / {Native} / {User 1} / {User 2}.
Color control
You can adjust the color tones of the image precisely by
changing the User-R (Red), User-G (Green) and User-B (Blue)
settings independently.
{Picture} - {Color temperature} - {User} setting to [User 1]
Or, you can adjust the color tones per 100K in the range of
2000K to 10000K.
{Picture} - {Color temperature} - {User} setting to [User 2]
Smart picture
The following smart picture modes are available for:
• PC mode: {Standard} / {Highbright} / {sRGB}.
• Video mode: {Standard} / {Highbright} / {Cinema}.
Smart power
Set the display to reduce the power consumption
automatically.
The options are: {Off} / {Medium} / {High}.
Overscan
Change the display area of the image.
• {On} - Display about 95% of the original size of the image.
The rest of the areas surrounding the image will be cut
off.
• {Off} - Display the image in its original size.
Picture reset
Reset all settings in the Picture menu.
7.2.2. Screen menu
Picture
Screen
Audio
PIP
Configuration 1
Configuration 2
Advanced Option
H position
Press the [ ] button to move the image to the right, or [ ]
to move the image to the left.
NOTES:
• H position adjustment applies to VGA input only.
• H position cannot be adjusted when {Pixel Shift} is
activated.
V position
Press the [ ] button to move the image up, or [ ] to move
the image down.
NOTES:
• V position adjustment applies to VGA input only.
• V position cannot be adjusted when {Pixel Shift} is
activated.
Clock
Adjust the width of the image.
NOTE: This item applies to VGA input only.
Clock phase
Adjust to improve the focus, clarity and stability of the
image.
NOTE: This item applies to VGA input only.
Zoom mode
The pictures you receive may be transmitted in 16:9 format
(wide screen) or 4:3 format (conventional screen). The
16:9 pictures sometimes have a black band at the top and
bottom of the screen (letterbox format). Zoom Mode will
be deactivated when {SUB Mode} of {PIP} is turned on, and
when {Tiling} is enabled.
Choose from: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}.
60
H position
V position
Clock
Clock phase
Zoom mode Full
Custom Zoom Action
Auto adjust Action
Screen reset Action
Full
This mode restores the correct
proportions of pictures transmitted in
16:9 using the full screen display.
4:3
The picture is reproduced in 4:3 format
and a black band is displayed on either
side of the picture.
50
50
50
50