Table of Contents
Advertisement
Options Summary
Enabled - Robot holds BIOS from starting POST, right after power on. This allows BIOS
POST to start with stable power or start after system is physically warmed-up.
Note: Robot does this before 'Send watch dog'.
Delayed POST
(DXE phase)
Enabled - Robot holds BIOS before POST completion. This allows BIOS POST to start
with stable power or start after system is physically warmed-up.
Note: Robot does this after 'Send watch dog before BIOS POST'.
Reset system once
Enabled - Robot resets system for one time on each boot. This will send a soft or hand
reset to onboard devices, thus puts devices to more stable state.
Chapter 3 – AMI BIOS Setup
Disabled
Enabled
Disabled
Enabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
41
Advertisement
Table of Contents
