Using The Lock Menu; To Set The On Timer - Toshiba 13A24 Owner's Manual

÷
÷
USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under 'SETTING THE
V-CHIP'on page 10.)
LOCKING CHANNELS
With the CR LOCK feature, you can lock specific channels.You will not be able to tune locked channels unless you clear the setting.
You can choose to lock up to nine TV channels and nine cable channels.
77 Use the Channel Number Buttons to the
(0-9)
display
television channel you wish to lock.
[]
[]
@
[]
Press MENU, then press SET + or = until the indicator
next to 'LOCK' begins to flash. Then press ENTER.
Use the Channel Number buttons (0-9) to enter your
password, then press ENTER.
The LOCK menu appears. I'-'_WDEOm ,LOCKcH LOCKLocK 1
Press SET + or = until the indicator next mGAMETIMER
to 'CH LOCK' begins to flash, then = C,ANGEP_SSWORD
press ENTER. <+/-/ENTER/MENU)
Press SET + or = to select: r cH LOCK
" INPUT to select the channel as one to |, _BLE
J
be locked. Then press ENTER. I-,=_PuT::: : :: :::
,, ALL CLEAR to clear all channels from L mALLOL_,R ......
the list of locked channels. Then press
ENTER. <+//ENTER/MENU>
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the menu screen is cleared.
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
o If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR in step 5,
then press ENTER.
LOCKING VIDEO iNPUT
With the VIDEO LOCK feature, you can lock out the input
source VIDEO) and channel 3 and 4.
Youw notbeabetoseectthe nputsourceswththeTVi
WDEO button or Channel buttons unless you clear the setting.
] Press MENU, then press SET + or = until the indicator
next to "LOCK' begins to flash, then press ENTER.
[_ Use the Channel Number buttons (0-9) to enter your
password, then press ENTER. The LOCK menu appears.
SETTING THE GAME TIMER
With the GAME TIMER feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing aTV game (30, 60, 90, or 120 minutes).
IT] Press MENU, then press SET + or = until the indicator next to
"LOCK' begins to flash, then press ENTER.
] Use the Channel Number buttons (0-9) to enter your pass-
word, then press ENTER. The LOCK menu appears.
o ProsssET or un hendcator [v D EoocK }OO
next to "VIDEO LOCK' begins to flash, _.OFF
then press ENTER. w_o
VIDEO+
[_ Press SET + or = tO select:
" OFF: Unlocks all video input sources. (+/-/ENTER/MENUr
" VIDEO: Locks VIDEO.
,, VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
[_] Press MENU repeatedly until the menu screen is cleared.
NOTE:
After programming VIDEO LOCK, change channels or activate
the TVNIDEO key before turning off the television.
Press SET + or = until the indicator next to 1" G,,ME TIMER
"GAME TIMER" begins to flash, then
press [
• OFF
J
ENTER. 30
60
90
Press SET + or = to select a time limit _20
(30 minutes, 60 minutes, 90 minutes, 120 { /-/ENTER/MENU}
minutes or OFF).
Press MENU repeatedly until the menu screen is cleared.
After the GAME TIMER is programmed, the display will ap-
pear briefly every ten minutes to remind you that the GAME
TIMER is operating. When the programmed end time is
reached, the display will change the channel automatically.
TO SET THE ON TIMER
This feature allows you to program the TV to turn on automatically at a set time and channel.
NOTE: After a power failure or disconnection of the power, the timer setting will be lost.
] PressMENU, then pressSET+or- until [
the indicator next to "ON TIMER" begins
to flash. Then press ENTER.
The ON TIMER menu appears.
ON TIMER l
HOUR \0_h /
MINUTE /0r_m \
CH 002 CANCEL
(+/--t ENTER / MENU i
[_ + or = to set
Press SET the desired
channel, then press ENTER.
] Press SET to set the desired hour then
+ or
(0-12),
press ENTER.
[_ Press SET to set the desired minute + or
(00, 05, 10, ._55), then press ENTER.
I ON TI[IER 1
HOUR 08h
MINUTE \ 15iT /
OH 125 }SET c
(+_ _ ENTER _MENUI
] Press SET + or = to select the SET mode, then press ENTER.
Press MENU repeatedly until the is cleared.
menu screen
NOTE:
To cancel the ON TIMER, select CANCEL in step 4 above. Press
MENU repeatedly until the menu screen is cleared.
11
÷
3M12701A-E P08-12
÷
5/2/04, 10:02