Advertisement
OPERATIONS
(3) Press the MEMORY switch.
® The display will flash (about 10 seconds).
When presetting a station to Mode 2 (e.g. presetting
a station to No. 21):
MEs«oE.
By pressing the station call switch twice, the station will
|
|
|
be preset to Mode 2.
FM
Mrz
Frequency
display
(4) Press the STATION CALL switch
While
the display is flashing, press the switch cor-
responding to the station which you wish to preset or
re-preset.
After
you
press
the STATION
CALL
switch,
the
will be memorized.
If you press another switch while
the display is flashing, the station will not be memorized.
By pressing the station call switch once, the station will
be preset to Mode 1.
Station call switch number
Press twice
Station call switch number
Press once
STATION CALL switch "13" when listening to the station
memorized in switch "9," press switch "1/13" twice.
In this way, simple and accurate reception of any desired sta-
tion is possible.
cas
coca eves
NOTE:
(1)
e
The contents of the STATION
CALL switch will be preserved
(1) Press the STATION CALL switch into which the
es ged plea [Beh Lik ee
desired station has been memorized.
:
® To listen to a Mode
1 broadcast,
press the switch
Last station
memory
ones, and "to listen toe Mode 2 broadcast, prose It
* When the amplifier POWER switch is pressed to turn
twice.
power on, the last station received before the power was
¢ By pressing the STATION
CALL switch, the switch
number will be displayed, then the frequency will
be displayed.
STATION
CALL switch "memo"
It is recommended that you make a note of the preset stations.
| S.C. switch]
Cc. switch | « |
previously turned off will be received again.
When power is ON, if the BAND selector switch is pressed,
the last station received before the BAND selector switch
was previously pressed will be received again.
Lee
of each
station
| _ Frequency
|
[scotch
[oo
[8
Nene of P ivadcast
station
| __ Frequency
12
<ARB1160>
Advertisement
