Advertisement
OPERATIONS
SOUND
COMPENSATION
(Using the Graphic Equalizer)
All instruments and vocals have their own frequen-
cy band, as shown in the figure.
By moving the controls up or down, the volume of
the instruments preferred can be boosted or other
instruments can be attenuated.
For instance, it is possible to boost the 100Hz fre-
quency and give the bass drum greater "punch" or
boost the 1kHz frequency and position the vocals
at the front. When the 10kHz frequency is boosted,
the cymbals and "high hat" sound much clearer.
instruments
and vocals have a great many
har-
monic
components
along
with the fundamental
frequency band and so you can have lots of fun op-
erating the 5 controls to achieve the sound of your
choice.
ANTENNA CONNECTIONS
?
= claunet
net
— oo ce
|
Oboe
—_
horn
Bassoon
Bass ar
arunr
la
40
«60 160
200
400
600
Ye
ray
4k
6h
10k
20%
100
330
1k
3.3k
Pipe organ
——-—
Frequency (Hz)
AM ANTENNA
The AM
loop antenna
supplied
with the tuner should
be
connected to the AM antenna terminals. The antenna should
be placed at a distance from the tuner, and should not be
allowed to touch metallic objects. Avoid placing it near CD
players, personal computers, television sets, and other devices
generating radio frequencies.
Setting Up the AM Antenna
¢ Fold out the supports on the bottom of the antenna. Insert
the stopper in the hole in the antenna to lock them in place.
¢ Place the antenna on a level surface and rotate it to locate
the orientation that yields the best reception.
AM
Loop Antenna
Set-up
Hole
—
ta
AM
Loop Antenna
Stopper
Connection
The accessory AM loop antenna must be
connected to ensure proper reception.
External AM antenna
Indoor AM antenna
Provide a viny!-coated wire (5 to 6 meters long). Secure one
end to the AM terminal and the other end to a wall or other high
location.
Outdoor AM antenna
If reception is still poor even when a lead antenna has been
stretched out indoors, stretch out a vinyl-coated wire and
secure it outdoors.
14
<ARB1160>
Connecting the external AM antenna
Outdoors AM antenna
Indoor AM antennal
AM loop antenna
NOTE:
Do not detach the AM loop antenna
when using the external AM
antenna.
External FM antenna installation
Use an external antenna when the signals from the station are
weak and cannot be picked up by the accessory T-type FM
antenna, or when the sound heard is accompanied by large
amounts of noise. There are two ways of connecting 300 ® .
feeder wire, or with a 75 Q coaxial cable.
tt is recommended that you use the 75 2 coaxial cable, so that
the effects of extraneous noise are reduced to a minimum.
When the connecting cable
is a 75Q coaxial cable
752 coaxial cable
When the connecting
cable is a 3002
feeder wire
Advertisement
