Beko HNS 61212 XH User Manual page 10

3 Operation of the appliance
Lamp
Power
4 W
Socket
E14
Voltage
220-240 V
Dimension 107x37 mm
ILCOS Code DRBB/F-4-220-240-E14-35/100
3.4 Operation with flue
connection
•
Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
• The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
3.5 Operation without flue
connection
•
Air is filtered through the carbon
filter and recirculated in the
room. Carbon filter is used
when it is impossible to use a
flue in the house.
• In flueless use, remove the flaps inside the flue
adapter.
• Remove the oil filter. To install the carbon filter, fit
the filter to the tabs by centring it on the plastic
piece on both sides of the fan body. Tighten it by
turning right or left.
10 / EN
Replace aluminium oil filter.
•
CAUTION: To activate the carbon fil-
ter, the mode is activated by holding
A
down the automatic stop button and
air cleaning button for 3 seconds. If
the product switches to use with flue,
it should be deactivated in the same
way.
Cooker Hood / User Manual